Kellett has been able to reduce or even eliminate much of the detectable vibration from equipment that is transferred by means of load bearing “contact” with support surfaces, with the LP-13 Shake Absorber® Vibration Isolation pads. These products provide a cost effective solution to this problem. The pads have been called many things: vibration pads, vibration isolation pads, vibration isolators, machine mounting pads, shake or shock absorbers. Whatever you call them, our products convert the mechanical energy to a small amount of heat energy, and that in effect prevents transfer of vibration at the contact points.
Heat causes the majority of damage to electrical and electronic components. Heat builds up in an electrical circuit when there is a poor connection between conductors. Vibration is often the culprit. Vibration can loosen the electrical components, causing circuits to over amp, and ultimately generate excessive heat. The worse case scenario is component failure.
Listed below are a few of the LP-13 Shake Absorber® Characteristics. To see complete technical data on our products, visit
kellettent.com/technical
- Shore Durometers from 50 - 70
- Thicknesses from 1/4 in - 3/4 in
- Temperature ranges from -40° up to 200°+ Fahrenheit
- Oil , Abrasion, Flame, and UV Resistant
Listed below are standard sizes of our LP-13 Shake Absorber® Vibration Isolation products.
The products below come in two Shore A Durometers. If you don’t see the size you need, please call our sales team at 864.277.7248. We are here to help you get the right product for the right application and at the right price.
50 Durometer vs 70 Durometer, Which do I choose?
